Removal Procedure
- Remove the side rear door trim panel. Refer to
Rear Side 60/40 Door Trim Panel Replacement - Right Side
or
Rear Side 60/40 Door Trim Panel Replacement - Left Side
.
- Disconnect the lock rods (3) from the side rear door latch handle (4).
- Remove the nuts (2) that retain the side rear door latch handle (4) to the side rear door.
- Remove the side rear door latch handle (4) from the door.
Installation Procedure
- Install the side rear door latch handle (4) to the door.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the nuts (2) that retain the side rear door latch handle (4) to the side rear door.
Tighten
Tighten the bolts to 11 N·m (97 lb in).
- Connect the lock rods (3) to the side rear door latch handle (4).
- Remove the side rear door trim panel. Refer to
Rear Side 60/40 Door Trim Panel Replacement - Right Side
or
Rear Side 60/40 Door Trim Panel Replacement - Left Side
.