Removal Procedure
- Turn OFF the headlamp switch.
- Remove the bolts (5) that retain the composite headlamp to the radiator support.
Do not move the adjustment screws.
Caution: Refer to Halogen Bulb Caution in the Preface section.
- Disconnect the electrical connector (1) from the headlamp assembly.
- Remove the composite headlamp (4) from the vehicle.
Installation Procedure
Caution: Refer to Halogen Bulb Caution in the Preface section.
- Connect the electrical connector (1) to the headlamp assembly.
- Install the composite headlamp (4) to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the composite headlamp retaining bolts (5) to the radiator support.
Tighten
Tighten the bolts to 11 N·m (97 lb in).