GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 362113  Size: SH
  1. Remove the screws retaining the lens to the lamp.
  2. Remove the lens from the lamp.
  3. Gently push in on the bulb and turn the bulb 1/4 turn counterclockwise.
  4. Remove the bulb from the socket.

Installation Procedure


    Object Number: 362113  Size: SH
  1. Install the bulb to the socket.
  2. Gently push in on the bulb and turn the bulb 1/4 turn clockwise.
  3. Install the lens to the lamp assembly.
  4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  5. Install the screws to retain the lens to the lamp assembly.
  6. Tighten
    Tighten the screws to 1.5 N·m (13 lb in).