Removal Procedure
- Remove the left knee bolster bracket. Refer
to
Driver Knee Bolster Bracket Replacement
in Instrument Panel, Gages, and Console.
- Remove the turn / hazard flasher (2) from the Instrument Panel
(I/P) Support.
- Disconnect the electrical connector (1).
- Remove the turn / hazard flasher (2).
Installation Procedure
- Connect the electrical connector (1) to
the turn / hazard Flasher (2).
- Install the turn / hazard flasher (2) to the Instrument Panel (I/P)
Support.
- Install the left knee bolster bracket. Refer to
Driver Knee Bolster Bracket Replacement
in Instrument Panel, Gages, and Console.