Removal Procedure
- Remove the primary battery tray. Refer to
Battery Tray Replacement
.
- Disconnect the vacuum hose from the vacuum tank.
- Remove the screws (1) from the vacuum tank retainers.
- Remove the vacuum tank (3) from the battery tray.
Installation Procedure
- Install the vacuum tank (3).
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (1) to the vacuum tank retainers.
Tighten
Tighten the screws to 6 N·m (53 lb in).
- Connect the vacuum hose.
- Install the primary battery tray. Refer to
Battery Tray Replacement
.