Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the generator bracket bolts to 50 N路m (37 lb ft).
Caution: Refer to Battery Disconnect Caution in the Preface section.
6.1. | Slide the boot down to access the terminal stud. |
6.2. | Remove the positive cable nut. |
6.3. | Remove the positive cable. |
Tighten
Tighten the generator mounting bracket bolts to 50 N路m (37 lb ft).
Tighten
Tighten the drive belt tensioner bolt to 50 N路m (37 lb ft).
Tighten
Tighten the oil indicator tube bracket bolt to 21 N路m (15 lb ft).
Tighten
Tighten the wiring harness routing bolts to 10 N路m (89 lb in).
Tighten
Tighten the right engine wiring harness bracket bolts to 10 N路m (89 lb in).
7.1. | Install the positive cable. |
7.2. | Install the positive cable nut. |
Tighten
Tighten the positive cable nut to 9 N路m (80 lb in).
7.3. | Slide the boot to cover the terminal stud. |
Tighten
Tighten the generator bolts to 50 N路m (37 lb ft).
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the bolts/nut to 41 N路m (30 lb ft).
Tighten
Tighten the bolt to 25 N路m (18 lb ft).
Tighten
Tighten the bolt to 25 N路m (18 lb ft).
In order to install the air cleaner outlet duct, pivot the air cleaner outlet duct downward until the mounting stud is through the hole.
Tighten
Tighten the clamps to 4 N路m (35 lb in).