For 1990-2009 cars only
Introduction
The replacement of the inflatable restraint sensing and diagnostic module (SDM) will require that the SDM part number be relearned by other modules, such as the body control module (BCM), and the powertrain control module (PCM). The following procedures are designed to setup the SDM correctly and must be performed.
Important:
• The Air Bag indicator may illuminate and DTC B1001 may set during
the BCM reprogramming procedure. • Use the 10-minute relearn procedure when programming the theft deterrent
system.
- Program the BCM with the proper regular production options (RPO). Refer to Body Control Module Programming and Setup .
- Clear any DTC.
- Perform the Diagnostic System Check - Vehicle .
