GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the engine cover. Refer to Engine Cover Replacement.
  2. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement.

  3. Object Number: 769280  Size: SH
  4. Remove the windshield defrost duct retaining screws at the heater case.
  5. Remove the windshield defrost duct retaining nuts at the cowl.
  6. Remove the windshield defrost duct (5) from the vehicle.

Installation Procedure


    Object Number: 769280  Size: SH
  1. Install the windshield defrost duct (5) to the vehicle.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the windshield defrost duct retaining nuts to the cowl.
  4. Tighten
    Tighten the nuts to 4 N·m (35 lb in).

  5. Install the windshield defrost duct retaining screws to the heater case.
  6. Tighten
    Tighten the screws to 4 N·m (35 lb in).

  7. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement.
  8. Install the engine cover. Refer to Engine Cover Replacement.