Useful information about a tire is molded into the sidewall.
The following illustrations are examples of a typical P-Metric and a LT-Metric
tire sidewall.
Passenger (P-Metric) Tire
(A) Tire Size : The tire size code is a combination of letters and numbers used to define
a particular tire's width, height, aspect ratio, construction type, and service description.
See the "Tire Size" illustration later in this section for more detail.
(B) TPC Spec (Tire Performance Criteria Specification) : Original equipment tires designed
to GM's specific tire performance criteria have a TPC specification code molded onto
the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines.
(C) DOT (Department of Transportation) : The Department of Transportation (DOT) code
indicates that the tire is in compliance with the U.S. Department of Transportation
Motor Vehicle Safety Standards.
(D) Tire Identification Number (TIN) : The letters and numbers following DOT code are
the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code,
tire size, and date the tire was manufactured. The TIN is molded onto both sides of
the tire, although only one side may have the date of manufacture.
(E) Tire Ply Material : The type of cord and number of plies in the sidewall and under the tread.
(F) Uniform Tire Quality Grading (UTQG) : Tire manufacturers are required to grade tires
based on three performance factors: treadwear, traction, and temperature resistance.
For more information, see
Uniform Tire Quality Grading
.
(G) Maximum Cold Inflation Load Limit : Maximum load that can be carried and the maximum
pressure needed to support that load. For information on recommended tire pressure
see
Inflation - Tire Pressure
and
Loading the Vehicle
.
Light Truck (LT-Metric) Tire
(A) Tire Size : The tire size code is a combination of letters and numbers used to define
a particular tire's width, height, aspect ratio, construction type, and service description.
See the "Tire Size" illustration later in this section for more detail.
(B) TPC Spec (Tire Performance Criteria Specification) : Original equipment tires designed
to GM's specific tire performance criteria have a TPC specification code molded onto
the sidewall. GM's TPC specifications meet or exceed all federal safety guidelines.
(C) Dual Tire Maximum Load : Maximum load that can be carried and the maximum pressure
needed to support that load when used in a dual configuration. For information on
recommended tire pressure see
Inflation - Tire Pressure
and
Loading the Vehicle
.
(D) DOT (Department of Transportation) : The Department of Transportation (DOT) code
indicates that the tire is in compliance with the U.S. Department of Transportation
Motor Vehicle Safety Standards.
(E) Tire Identification Number (TIN) : The letters and numbers following DOT code are
the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code,
tire size, and date the tire was manufactured. The TIN is molded onto both sides of
the tire, although only one side may have the date of manufacture.
(F) Tire Ply Material : The type of cord and number of plies in the sidewall and under the tread.
(G) Single Tire Maximum Load : Maximum load that can be carried and the maximum pressure
needed to support that load when used as a single. For information on recommended
tire pressure see
Inflation - Tire Pressure
and
Loading the Vehicle
.
Tire Size
The following examples show the different parts of a tire
size.
Passenger (P-Metric) Tire
Light Truck (LT-Metric) Tire
(A) Passenger (P-Metric) Tire : The United States version of a metric
tire sizing system. The letter P as the first character in the tire size means a passenger
vehicle tire engineered to standards set by the U.S. Tire and Rim Association.
(A) Light Truck (LT-Metric) Tire : The United States version of a metric
tire sizing system. The letters LT as the first two characters in the tire size means
a light truck tire engineered to standards set by the U.S. Tire and Rim Association.
(B) Tire Width : The three-digit number indicates the tire section width in millimeters
from sidewall to sidewall.
(C) Aspect Ratio : A two-digit number that indicates the tire height-to-width
measurements. For example, if the tire size aspect ratio is 75, as shown in item C
of the light truck (LT-Metric) tire illustration, it would mean that the tire's
sidewall is 75 percent as high as it is wide.
(D) Construction Code :
A letter code is used to indicate the type of ply construction
in the tire. The letter R means radial ply construction; the letter D means diagonal
or bias ply construction; and the letter B means belted-bias ply construction.
(E) Rim Diameter : Diameter of the wheel in inches.
(F) Service Description : These characters represent the load index and speed rating
of the tire. The load index represents the load carry capacity a tire is certified
to carry. The speed rating is the maximum speed a tire is certified to carry a load.