Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

1

Camshaft Position Sensor Bolt (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Clean the area around the camshaft position (CMP) sensor before removal in order to prevent debris from entering the engine.

Tighten
12 N·m(106 lb in)

2

Camshaft Position Sensor Bracket Assembly

Procedure

Disconnect the electrical connectors.

3

Camshaft Position Sensor

4

Camshaft Position Sensor O-ring Seal

Procedure

Lubricate the O-ring seal with clean engine oil.