GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Savana - AWD 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Release Handle Assembly Replacement

Removal Procedure
  1. Disconnect the release cable from the brake lever.
  2. Disconnect the cable from the retainer on the brake lever.
  3. Remove the park brake release lever handle mounting bolt.

    4. Object Number: 1207216 Size: SH
  4. Remove the release handle from the instrument panel retainer.
  5. Remove the release handle and cable from the vehicle. Note the routing of the cable as you remove the park release handle assembly from the vehicle.

Installation Procedure

    Object Number: 1207216 Size: SH
  1. Install the release handle and the cable to the vehicle. Install the cable using the same routing as the original cable.
  2. Install the release handle to the instrument panel retainer.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the park brake release lever handle mounting bolt.

    4. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  4. Connect the cable to the retainer on the brake lever.
  5. Connect the release cable to the lever.