GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Savana - AWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Side 60/40 Door Trim Panel Replacement - Right Side

Rear Side 60/40 Door Trim Panel Replacement - Right Side E24, 40 Door

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

    Object Number: 879680 Size: SH
  1. Use the J 38778 to disengage the retainers around the outside edges of the lower portion of the door trim panel (1).
  2. Carefully pull the door trim panel (1) out of the retainers around the window opening.

    3. A long flat bladed tool may be necessary to aid in releasing the door trim panel (1) from the window opening retainers.

  3. Remove the front door panel (1) from the vehicle.

Installation Procedure

    Object Number: 879680 Size: SH
  1. Install the door trim panel (1) to the door by performing the following:

    2. Align the door trim panel (1) to the retainers in the window opening.

  2. Push towards the door to engage the retainers.
  3. Align the retainers on the edges of the lower portion of the door trim (1).
  4. Push towards the door to engage the retainers.

Rear Side 60/40 Door Trim Panel Replacement - Right Side E24, 60 Door

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

    Object Number: 879694 Size: SH
  1. Remove the rear side door trim plate. Refer to Rear Door Trim Plate Replacement .
  2. Remove the side door pull handle screws.
  3. Remove the side door pull handle.
  4. Use the J 38778 to disengage the retainers around the outside edges of the lower portion of the door trim panel (1)
  5. Carefully pull the door trim panel (1) out of the retainers around the window opening.

    6. A long flat bladed tool may be necessary to aid in releasing the door trim panel (1) from the window opening retainers.

  6. Remove the door panel (1) from the vehicle.

Installation Procedure

    Object Number: 879694 Size: SH
  1. Install the door trim panel (1) to the door by performing the following:
    2. • Align the door trim panel (1) to the retainers in the window opening.
    • Push towards the door to engage the retainers.
    • Align the retainers on the edges of the lower portion of the door trim (1).
    • Push towards the door to engage the retainers.

    Notice: Refer to Fastener Notice in the Preface section.

  2. Install the pull handle and screws.

    3. Tighten
    Tighten the screws to 1.9 N·m (17 lb in).

  3. Install the rear side door trim plate. Refer to Rear Door Trim Plate Replacement .