GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Savana - AWD 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Hood Replacement

Removal Procedure
  1. Place protective covering over adjacent body panels.
  2. Remove the wiper arms from the vehicle. Refer to Windshield Wiper Arm Replacement.

    3. Object Number: 314927 Size: SH
  3. Open and support the hood.
  4. Remove the underhood lamp and the harness from the hood. Refer to Underhood Lamp Replacement.
  5. Remove the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement .
  6. Remove the pivot bolts (4) and the nuts (2) from the hinge (1).
  7. With an assistant, remove the hood from the vehicle.

Installation Procedure

    Object Number: 314927 Size: SH
  1. With an assistant, install the hood to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the hinge pivot bolt (4) and nuts (2) to the hinge (1).

    3. Tighten
    Tighten the hood hinge pivot bolts and nuts to 25 N·m (18 lb ft).

  3. Install the underhood lamp and the harness to the hood. Refer to Underhood Lamp Replacement.
  4. Install air inlet grille panels. Refer to Air Inlet Grille Panel Replacement .
  5. Install the wiper arms to the vehicle. Refer to Windshield Wiper Arm Replacement.