GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Savana - AWD 🢒 Engine 🢒 Engine Electrical 🢒 Auxiliary Generator Bracket Replacement

Removal Procedure

Warning: Refer to Battery Disconnect Warning in the Preface section.

  1. Remove the fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement.
  2. Disconnect the auxiliary generator electrical connector.
  3. Remove the drive belt. Refer to Drive Belt Replacement.

    4. Object Number: 1369548 Size: SH
  4. Remove the positive battery cable from the auxiliary generator, perform the following:
    5. 4.1. Slide the boot (4) down to access the terminal stud.
    4.2. Remove the positive cable nut (1).
    4.3. Remove the positive cable.

    Object Number: 1369547 Size: SH
  5. Remove the auxiliary generator bolts (3).
  6. Remove the auxiliary generator (4).

    7. Object Number: 1369546 Size: SH
  7. Remove the auxiliary generator bracket bolts.
  8. Remove the auxiliary generator bracket.

Installation Procedure

    Object Number: 1369546 Size: SH
  1. Install the auxiliary generator bracket.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the auxiliary generator bracket bolts and tighten to 50 N·m (37 lb ft).

    3. Object Number: 1369547 Size: SH
  3. Install the auxiliary generator (4).
  4. Install the auxiliary generator bolts (3) and tighten to 50 N·m (37 lb ft).

    5. Object Number: 1369548 Size: SH
  5. Install the positive cable to the auxiliary generator, perform the following:
    6. 5.1. Install the positive cable.
    5.2. Install the positive cable nut (1) and tighten to 9 N·m (80 lb in).
    5.3. Slide the boot (4) up to cover the terminal stud.
  6. Install the drive belt. Refer to Drive Belt Replacement.
  7. Connect the auxiliary generator electrical connector (3).
  8. Install the radiator fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement.