Removal Procedure
- Remove the window regulator handle, if equipped. Refer to
Door Window Regulator Handle Replacement.
- Remove the inside door handle bezel. Refer to
Front Side Door Inside Handle Bezel Replacement.
- Remove the screws (2) that retain the front door trim plate (1) to the door panel.
- Pull the bottom of the front door trim plate (1) out in order to release the front door trim plate (1) retainers.
- Remove the front door trim plate from the front door trim panel.
- Disconnect the electrical connectors from the switches on the front door trim plate, if equipped.
- Remove the front door trim plate (1) from the vehicle.
Installation Procedure
- Partially install the front door trim plate (1) to the front door trim panel.
- Connect the electrical connectors to the switches, if equipped.
- Align the retainers on the front door trim plate (1) to the slots in the front door trim panel
- Push towards the door panel to engage the front door trim plate (1) retainers.
Caution: Refer to Fastener Caution in the Preface section.
- Install the screws (2) and tighten to
1.9 N·m (17 lb in).
- Install the inside door handle bezel. Refer to
Front Side Door Inside Handle Bezel Replacement.
- Install the window regulator handle, if equipped. Refer to
Door Window Regulator Handle Replacement.