Removal Procedure
- Remove the seat from the vehicle. Refer to
Driver or Passenger Seat Replacement.
- Disconnect the electrical connector from the seat position sensor.
Warning: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
- Drill out the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
- Remove the seat position sensor from the seat adjuster track bracket.
Installation Procedure
- Install the seat position sensor to the seat adjuster bracket.
- Install the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
- Connect the electrical connector to the seat position sensor.
- Install the passenger seat to the vehicle. Refer to
Driver or Passenger Seat Replacement.