GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 2WD 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Front Side Door Window Weatherstrip Replacement

Removal Procedure
  1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the water deflector Refer to Front Side Door Water Deflector Replacement .
  3. Remove the window. Refer to Front Side Door Window Replacement .

    4. Object Number: 370114 Size: SH
  4. Remove the screws.
  5. Pull the weatherstrip from the following locations:
    6. • The front of the glass run channel
    • The top of the window frame flange
    • The rear of the glass run channel
  6. Remove the weatherstrip from the door.

Installation Procedure

    Object Number: 370114 Size: SH
  1. Install the weatherstrip to the following locations:
    2. • The front of the glass run channel
    • The top of the window frame flange
    • The rear of the glass run channel

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolts.

    3. Tighten
    Tighten to 6 N·m (53 lb in).

  3. Install the window. Refer to Front Side Door Window Replacement .
  4. Install the water deflector. Refer to Front Side Door Water Deflector Replacement.
  5. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement.
  6. Inspect operation of window.