Caution: If a window is cracked but still intact, crisscross the window with
masking tape in order to reduce the risk of damage or personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and interior trim.
- Open the side access door.
- Cover to protect the following parts from broken glass if necessary:
| 2.2. | Defroster outlets and A/C outlets. |
| 2.3. | Seats and carpeting. |
- Remove the side access door trim, if equipped. Refer to
Rear Side Access Door Trim Panel Replacement.
Caution: When working with any type of glass or sheet metal with exposed or rough
edges, wear approved safety glasses and gloves in order to reduce
the chance of personal injury.
Important: Keep the cutting edge of the tool against the hinged body side window frame . Do this from inside the vehicle.
- This will allow the urethane adhesive to be separated from the hinged body side window frame.
| • | Leave a base of urethane on the pinchweld flange. |
| • | The only suitable lubrication is clear water. |
| • | Use
J 39032 or equivalent in order to remove the hinged body side window. |
- If the original hinged body side window frame is damaged it must be replaced, if equipped.
- With the aid of an assistant, remove the window from the opening.
