GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 2WD 🢒 Body Systems 🢒 Vehicle Access 🢒 Endgate Handle Rod Retainer Replacement

Removal Procedure

    Object Number: 814590 Size: SH
  1. Open the endgate.
  2. Remove the fasteners (1) retaining the endgate handle bezel.
  3. Remove the endgate handle bezel.
  4. Release the endgate latch rod from the handle rod retainer.

    5. Object Number: 1365910 Size: SH
  5. Release the retaining clip (2) and remove the handle rod retainer from the handle.

Installation Procedure

    Object Number: 1365910 Size: SH
  1. Install the handle rod retainer to the handle, ensuring the retaining clip (2) is fully seated.
  2. Attach the endgate latch rod to the handle rod retainer.
  3. Install the endgate handle bezel.

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 814590 Size: SH
  4. Install the fasteners (1) retaining the endgate handle bezel.

    5. Tighten
    Tighten the fasteners to 2.5 N·m (22 lb in).

  5. Close the endgate.