GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the instrument panel (I/P) trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .
  2. Lower the headliner. Refer to Headlining Trim Panel Replacement .

  3. Object Number: 853340  Size: SH
  4. Disconnect the cables from the antenna base.
  5. Important: Observe the routing of the cables.

  6. Remove the cable retainers from the roof and pillar.

  7. Object Number: 854863  Size: SH
  8. Disconnect the cable (3) from the module.

Installation Procedure

  1. Install the cable retainers to the roof and pillar.

  2. Object Number: 854863  Size: SH
  3. Connect the cables (3) to the module.

  4. Object Number: 853340  Size: SH
  5. Connect the cables to the antenna base.
  6. Important: Ensure the cables are routed properly and there is no sharp bends in the cables.

  7. Install the headliner. Refer to Headlining Trim Panel Replacement .
  8. Install the I/P trim panel. Refer to Instrument Panel Upper Trim Panel Replacement .