GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
GMC_Truck
🢒
2007
🢒
Sierra Classic - 4WD
🢒
Engine
🢒
Engine Controls and Fuel - 6.6L (LBZ and LLY)
🢒 Water in Fuel Indicator Sensor Replacement
Removal Procedure
Drain the fuel from the fuel filter. Refer to
Water-in-Fuel Draining
.
Remove the right front wheelhouse panel. Refer to
Wheelhouse Panel Replacement
.
Disconnect the fuel filter electrical connectors.
Remove the water-in-fuel sensor (3) from the fuel filter (2).
Installation Procedure
Important:
The water-in-fuel sensor must ONLY be tightened by hand.
Install the water-in-fuel sensor (3) to the fuel filter (2).
Connect the fuel filter electrical connector.
Install the right front wheelhouse panel. Refer to
Wheelhouse Panel Replacement
.
Prime the fuel system. Refer to
Fuel System Priming
.
Start the engine. If the engine stalls, repeat the above step.
Once the engine starts, inspect for fuel leaks.