Removal Procedure
- Remove the wiring harness retainer from the bracket.
- Remove the oil level indicator tube bolt.
- Remove the oil level indicator tube bracket bolts.
- Remove the bracket.
- Remove the fuel filter and bracket. Refer to
Fuel Filter Replacement
.
- Disconnect the return line from the return/junction block line.
- Remove the fuel return line clips.
- Remove the fuel injector return line from the injectors.
Installation Procedure
- Install the fuel injector return line to the injectors.
- Install the fuel return line clips.
- Connect the return line to the return/junction block line.
- Install the fuel filter and bracket. Refer to
Fuel Filter Replacement
.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bracket.
- Install the oil level indicator tube bracket bolts.
Tighten
Tighten the bolts to 21 N·m (15 lb ft).
- Install the oil level indicator tube bolt.
Tighten
Tighten the bolt to 21 N·m (15 lb ft).
- Install the wiring harness retainer to the bracket.
- Prime the fuel system. Refer to
Fuel System Priming
.
- Start the engine. If the engine stalls, repeat the above step.
- Once the engine starts, inspect for fuel leaks.