Clutch Pilot Bearing Removal without RPO HP2

Tools Required

J 43276 Clutch Pilot Bearing Remover

Notice: When using the J 43276 Clutch Pilot Bearing Remover, always secure the J 43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J 43276-1 tool body to rotate. Failing to do so causes damage to the J 43276-1 tool body.

Important: The flywheel spacer, if applicable, must be removed prior to clutch pilot bearing removal.

1. Remove the clutch pilot bearing using the J 43276 .

1.1.	Install the J 43276-1 into the clutch pilot bearing.

1.2.	Using a wrench, secure the J 43276-1.

1.3.	Insert the J 43276-2 into the J 43276-1.

1.4.	Rotate the J 43276-2 clockwise into the J 43276-1 until the clutch pilot bearing is completely removed from the crankshaft.

1.5.	Rotate the J 43276-2 counterclockwise to remove the J 43276-2 from the J 43276-1.

1.6.	Remove the J 43276-1 from the tool body.




2. Discard the pilot bearing.

Clutch Pilot Bearing Removal RPO HP2

Tools Required

J 45849 Bearing Remover

1. Install the J 45849  (1) into the flex plate locator (2).
2. Using 2 wrenches, rotate the inner shaft of the J 45849 in order to remove the locator.



3. Remove the flex plate locator (147) from the rear of the crankshaft.