GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 4WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Door Lock and Side Window Switch Replacement - Passenger Side

Removal Procedure

    Object Number: 833288 Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement.
  2. Remove the screw (2) that retains the switch panel bezel (1) to the front door trim panel.

    3. Object Number: 811888 Size: SH
  3. Remove the switch panel bezel from the door panel using a flat-bladed tool.

    4. Object Number: 833443 Size: SH
  4. Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
  5. Remove the door module from the switch panel bezel.

Installation Procedure

    Object Number: 833443 Size: SH
  1. Install the door module into the switch panel bezel until it snaps into place.
  2. Install the switch panel bezel and module into the door trim panel.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 833288 Size: SH
  3. Install the screw (2) that retains the switch panel bezel (1) to the front door trim panel.

    4. Tighten
    Tighten the screw (2) to 2 N·m (18 lb in).

  4. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement.
  5. Perform the necessary setup and programming procedures. Refer to Control Module References for programming and setup information.