Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Lighting Systems Connector End Viewsor Data Communication Connector End Views | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Turn ON the reading lamps. Does the system operate normally? | Go to Step 3 | |
3 | Test the inadvertent power supply voltage circuit of the reading lamp for a short to ground, high resistance or an open. Refer to Circuit Testing and Wiring Repairs. Did you find and correct the condition? | Go to Step 8 | Go to Step 4 |
4 | Test the ground circuit of the reading lamp for high resistance or an open. Refer to Circuit Testing and Wiring Repairs. Did you find and correct the condition? | Go to Step 8 | Go to Step 5 |
5 | Inspect the inoperative bulb for an open filament. Is the bulb OK. | Go to Step 7 | Go to Step 6 |
6 | Replace the inoperative bulb. Refer to Dome Lamp Replacement. Did you complete the replacement? | Go to Step 8 | -- |
7 | Replace the dome lamp. Refer to Dome Lamp Replacement. Did you complete the replacement? | Go to Step 6 | -- |
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
