Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views or Data Communication Connector End Views | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Operate the cargo lamp to verify the fault is present. Does the system operate normally? | Go to Step 3 | |
3 | Disconnect the cargo lamp switch. Does the cargo lamp turn off? | Go to Step 4 | Go to Step 5 |
4 | Inspect for poor connections at the harness connector of the cargo lamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs. Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
5 | Repair the short to ground in the cargo lamp low control circuit. Refer to Wiring Repairs. Did you complete the repair? | Go to Step 7 | -- |
6 | Replace the cargo lamp switch. Refer to Fog Lamp and Cargo Lamp Switch Assembly Replacement. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
