Step | Action | Yes | No |
---|---|---|---|
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 |
Does the high beam indicator turn OFF as expected? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Do the high beam headlamps turn OFF as expected? | Go to Step 4 | |
4 | Using a scan tool, select instrument panel cluster (IPC), Special Functions, and command the Lamp Test ON, then OFF. Does the high beam indicator lamp turn ON and OFF when commanded? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 5 |
5 | Inspect for poor connections at the harness connector of the IPC. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
6 | Replace the IPC. Refer to Control Module References . Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |