• | J 22828 Input and Countershaft Race Installer |
• | J 22834-A Extension Housing Seal Installer |
• | The 1st speed gear synchronizer outer ring retaining ring (11) in the lower groove |
• | The 1st speed gear synchronizer inner ring (10) |
• | The 1st speed gear outer ring retainer ring (9) in the second groove |
• | The 1st speed gear synchronizer center ring (8) |
• | Turn, to align in first gear. |
• | The 1st speed gear synchronizer outer ring (7) |
• | The 1st/2nd speed synchronizer assembly (6) |
• | The tapered side of the sleeve faces up. |
• | Turn the 1st speed gear synchronizer rings to align in the synchronizer assembly. |
• | The 2nd speed gear synchronizer outer ring (5) |
• | Turn the ring, to align the tabs in the synchronizer assembly. |
• | The 2nd speed gear synchronizer center ring (4) |
• | The 2nd speed gear synchronizer outer ring retaining ring (3) in the third groove |
• | The 2nd speed gear synchronizer inner ring (2) |
• | The 2nd speed gear synchronizer outer ring retaining ring (1) in the top groove |
19.1. | The 2nd speed gear thrust washer retaining pin (3) |
19.2. | The 2nd speed gear thrust washer (2) |
Be sure the thrust washer is seated on the gear and the retaining pin.
19.3. | The 2nd speed gear thrust washer retainer ring (1) |