Tools Required
J 42738 Front Output
Shaft Seal Installer
Removal Procedure
- Remove the transfer case.
Refer to
Transfer Case Assembly Replacement
.
- Remove the input shaft seal, using a flat-tipped screwdriver.
Installation Procedure
Important: When installing the input shaft seal, make sure that the part numbers
on the seal are facing outward (toward the technician). The input shaft
seal should be even with the surface of the transfer case after installation.
- Position the seal on the input shaft.
- Using the J 42738
, install the input shaft seal.
- Install the transfer case. Refer to
Transfer Case Assembly Replacement
.