GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 4WD 🢒 Body Hardware and Trim 🢒 Floor Coverings and Headlinings 🢒 Front Floor Panel Carpet Replacement

Removal Procedure
  1. Remove the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .
  2. Remove the door sill plates. Refer to Front Side Door Sill Plate Replacement or to Rear Side Door Sill Plate Replacement .
  3. Remove the front seats. Refer to Front Seat Replacement - Bucket .
  4. Remove the floor storage console. Refer to Console Replacement .
  5. Remove the center seat, if equipped. Refer to Front Center Seat Replacement .
  6. Remove the control lever and the boot, if equipped. Refer to one of the following procedures:
    7. • For the NV 3500 transmission, refer to Control Lever and/or Boot Replacement .
    • For the NV 4500 transmission, refer to Control Lever and/or Boot Replacement .
  7. Remove the rear seat if equipped. Refer to Rear Seat Replacement .
  8. Remove the jack assembly.
  9. Remove the quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .
  10. Remove the lower bolt from the instrument panel (I/P) support post. Refer to Instrument Panel Carrier Replacement .

    11. Object Number: 276934 Size: SH
  11. Remove the carpet from the vehicle.

Installation Procedure

    Object Number: 276934 Size: SH

    Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

  1. Install the carpet to the vehicle.
  2. Install the lower bolt to the I/P support post. Refer to Instrument Panel Carrier Replacement .
  3. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .
  4. Install the jack assembly.
  5. Install the rear seat if removed. Refer to Rear Seat Replacement .
  6. Install the shift lever and the boot, if equipped. Refer to one of the following procedures:
    7. • For the NV 3500 transmission, refer to Control Lever and/or Boot Replacement .
    • For the NV 4500 transmission, refer to Control Lever and/or Boot Replacement .
  7. Install the center seat, if equipped. Refer to Front Center Seat Replacement .
  8. Install the floor storage console. Refer to Console Replacement .
  9. Install the front seats. Refer to Front Seat Replacement - Bucket .
  10. Install the door sill plates. Refer to Front Side Door Sill Plate Replacement or Rear Side Door Sill Plate Replacement .
  11. Install the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement .