GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 4WD 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Floor Console Bracket Replacement

Removal Procedure
  1. Remove both front seats. Refer to Front Seat Replacement - Bucket .
  2. Remove the upper console bezel. Refer to Floor Console Bezel Replacement .
  3. Remove the cupholder. Refer to Front Floor Console Cup Holder Replacement .

    4. Object Number: 854810 Size: SH
  4. Remove the screws (1) retaining the console to the instrument panel (I/P).
  5. Move the console assembly rearwards in order to disconnect the wire connectors.
  6. Remove the console assembly from the vehicle.
  7. Remove the console bin. Refer to Front Floor Console Compartment Replacement .
  8. Remove the amplifier and bracket from the console bracket.
  9. Remove the fasteners retaining the console to the bracket.

Installation Procedure
  1. Install the console to the bracket.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the fasteners retaining the console to the bracket.

    3. Tighten
    Tighten the fasteners to 2 N·m (17 lb in).

  3. Install the amplifier and bracket to the console bracket. Refer to Radio Speaker Amplifier Replacement .
  4. Install the console bin. Refer to Front Floor Console Compartment Replacement .
  5. Install the rear seat audio control to the console, if equipped. Refer to Rear Seat Audio Control Replacement .

    6. Object Number: 854810 Size: SH
  6. Install the console in the vehicle.
  7. Connect the wire connectors.
  8. Move the console forward in order to install the retaining screws.
  9. Install the 2 screws.

    10. Tighten
    Tighten the screws to 4 N·m (35 lb in).

  10. Install the cupholder to the console. Refer to Front Floor Console Cup Holder Replacement .
  11. Install the upper console bezel. Refer to Floor Console Bezel Replacement .
  12. Install both front seats. Refer to Front Seat Replacement - Bucket .