GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 4WD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Rear Side Door Latch Replacement - Upper

Removal Procedure
  1. Remove the door trim panel. Refer to Rear Side Access Door Trim Panel Replacement.

    2. Object Number: 348492 Size: SH
  2. Remove the latch retaining bolts.

    3. Object Number: 348490 Size: SH
  3. Disconnect the latch rod from the latch.

Installation Procedure

    Object Number: 348490 Size: SH
  1. Install the latch rod to the latch.

    2. Object Number: 348492 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the latch to the door.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).

  3. Install the latch retaining bolts.
  4. Install the door trim panel. Refer to Rear Side Access Door Trim Panel Replacement.