GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Classic - 4WD 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Center Console End Panel Replacement

Removal Procedure
  1. Remove the storage bin. Refer to Front Floor Console Compartment Replacement .
  2. Remove the rear cupholder from the end panel. Refer to Front Floor Console Rear Cup Holder Replacement .

    3. Object Number: 882669 Size: SH
  3. Remove the 2 retaining screws.

    4. Object Number: 882652 Size: SH
  4. Remove the top 2 retaining screws.
  5. Move the end panel rearwards to gain access to the electrical connectors.
  6. Remove the end panel from the console.
  7. Remove the rear seat audio controls, if equipped. Refer to Rear Seat Audio Control Replacement .
  8. Remove the power outlets from the end panel, if equipped. Refer to 12-Volt Accessory Power Receptacle Replacement .

Installation Procedure
  1. Install the power outlets to the end panel, if equipped. Refer to 12-Volt Accessory Power Receptacle Replacement .
  2. Install the rear seat audio control, if equipped. Refer to Rear Seat Audio Control Replacement .
  3. Connect all electrical connectors.
  4. Install the end panel to the console.

    5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 882652 Size: SH
  5. Install the 2 top retaining screws.

    6. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).


    Object Number: 882669 Size: SH
  6. Install the 2 retaining screws.

    7. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  7. Install the rear cupholder to the end panel. Refer to Front Floor Console Rear Cup Holder Replacement .
  8. Install the storage bin. Refer to Front Floor Console Compartment Replacement .