Removal Procedure
- Remove the sending unit. Refer to
Fuel Sender Assembly Replacement.
- Disconnect the fuel pump electrical connector.
- Remove the fuel lever sensor electrical connector retaining clip.
- Disconnect the fuel level sensor electrical connector.
- Remove the fuel level sensor retaining clip.
- Remove the fuel level sensor (1).
Installation Procedure
- Install the fuel level sensor (1).
- Install the fuel level sensor retaining clip.
- Connect the fuel level sensor electrical connector.
- Install the fuel lever sensor electrical connector retaining clip.
- Connect the fuel pump electrical connector.
- Install the sending unit. Refer to
Fuel Sender Assembly Replacement.