Rear Seat Belt Retractor Replacement Extended Cab
Caution: To avoid personal injury to the occupants of the vehicle, observe the
following precautions:
• | More than one supplier's seat belts are used, therefore, install
ONLY the seat belt components specified in the GM parts catalog. |
• | To verify that the correct seat belt components were installed,
insert the seat belt latch in the seat belt buckle. The latch must be fully
seated and be retained in the buckle until purposely released. |
Removal Procedure
- Remove the rear seat. Refer to
Rear Seat Replacement
.
- Remove the seat belt guide cover (1).
- Remove the rear seat belt to body bolts (2).
- Remove the rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement
.
- Remove the rear seat belt retractor to body bolt (1).
- Remove the retractor from the vehicle.
Installation Procedure
- Install the retractor to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear seat belt retractor to body bolt (1).
Tighten
Tighten the bolt to 53 N·m (39 lb ft).
- Install the rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement
.
- Install the rear seat belt to body bolts (2).
Tighten
Tighten the bolts to 53 N·m (39 lb ft).
- Install the seat belt guide cover (1).
- Install the rear seat. Refer to
Rear Seat Replacement
.
Rear Seat Belt Retractor Replacement Crew Cab
Caution: To avoid personal injury to the occupants of the vehicle, observe the
following precautions:
• | More than one supplier's seat belts are used, therefore, install
ONLY the seat belt components specified in the GM parts catalog. |
• | To verify that the correct seat belt components were installed,
insert the seat belt latch in the seat belt buckle. The latch must be fully
seated and be retained in the buckle until purposely released. |
Removal Procedure
- Remove the rear seat, if required. Refer to
Rear Seat Replacement
.
- Remove the rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement
- Remove the rear seat belt to body bolts.
- Remove the rear seat belt retractor to body bolt (1).
- Remove the retractor from the vehicle.
Installation Procedure
- Install the retractor to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear seat belt retractor to body bolt (1).
Tighten
Tighten the bolt to 53 N·m (39 lb ft).
- Install the rear seat belt to body bolts.
Tighten
Tighten the bolts to 53 N·m (39 lb ft).
- Install the rear quarter trim panel. Refer to
Rear Quarter Trim Panel Replacement
.
- Install the rear seat, if removed. Refer to
Rear Seat Replacement
.