Rear Seat Armrest Replacement 60/40 Split

1. Remove the rear seat armrest mount panel cover by removing the two push in retainers to gain access to the center armrest bolts.
2. Release the j-channel retainers from the armrest opening to gain access to the armrest bolts.
3. Remove the bolts that retain the center armrest to the seat frame.
4. Remove the center arm rest from the vehicle.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the center armrest to the seat frame.
2. Install the bolts to the center armrest.

Tighten
Tighten the bolt to 9 N·m (80 lb in).

3. Install the j-channel retainers in the armrest opening to the seat back frame.
4. Install the rear seat armrest mount panel cover .