GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise the hood.
  2. Remove the battery. Refer to Battery Replacement .
  3. Remove the battery tray. Refer to Battery Tray Replacement .
  4. Remove the washer reservoir. Refer to Windshield Washer Solvent Container and Pump Replacement .
  5. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

  6. Object Number: 331104  Size: SH
  7. Disconnect the horn electrical connector.
  8. Remove the horn bolt. Reposition the park/turn signal lamp wiring harness for additional clearance.
  9. Remove the horn (2) from the radiator support (1).

Installation Procedure


    Object Number: 331104  Size: SH

    Important: Ensure that the black side of the horn is facing forward on the vehicle.

  1. Install the horn (2) to the radiator support (1).
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the horn bolt.
  4. Tighten
    Tighten the horn bolts to 9 N·m (80 lb in).

  5. Connect the horn electrical connector.
  6. Lower the vehicle.
  7. Install the washer reservoir. Refer to Windshield Washer Solvent Container and Pump Replacement .
  8. Install the battery tray. Refer to Battery Tray Replacement .
  9. Install the battery. Refer to Battery Replacement .
  10. Close the hood.