Removal Procedure
- Disconnect the mass air flow (MAF)/intake
air temperature (IAT) sensor electrical connector (1).
- Remove the air cleaner outlet duct. Refer to
Air Cleaner Outlet Duct Replacement
.
- Disengage the baffle retainer and remove the baffle.
- Grasp the air cleaner assembly and pull
up on the assembly in order to disengage the retaining pins from the grommets.
Installation Procedure
- Line up the retaining pins with the grommets.
- Install the air cleaner assembly until the air cleaner is seated fully
on the mounts and is up against the fender apron.
- Install the baffle and engage the baffle retainer.
- Install the air cleaner outlet duct. Refer
to
Air Cleaner Outlet Duct Replacement
.
- Connect the MAF/IAT sensor electrical connector (1).