Fuel Level Sensor Replacement Regular Cab w/26 Gal Tank
Removal Procedure
- Remove the fuel tank module. Refer to
Fuel Sender Assembly Replacement .
- Disconnect the fuel level sensor wiring pigtail electrical connector (1) from the module cover.
- Remove the fuel level sensor wiring pigtail from under the module clip (1).
- Gently push in the fuel level sensor retainers (2), disengaging them from the module reservoir.
- Slide the fuel level sensor up, in order to remove the sensor from the module slot.
Installation Procedure
- Position the fuel level sensor over the slot in the reservoir and slide the sensor down into the slot.
- Ensure that the fuel level sensor retainers (2) engage the module reservoir.
- Install the fuel level sensor wiring pigtail under the module clip (1).
- Connect the fuel level sensor wiring pigtail electrical connector (1) to the module cover.
- Install the fuel tank module. Refer to
Fuel Sender Assembly Replacement .
Fuel Level Sensor Replacement Extended Cab w/26 Gal Tank
Removal Procedure
- Remove the fuel tank module. Refer to
Fuel Sender Assembly Replacement.
- Disconnect the fuel level sensor wiring pigtail electrical connector (1) from the module cover.
- Remove the fuel level sensor wiring pigtail from under the module clip (2).
- Gently push in the fuel level sensor retainers (1), disengaging them from the module reservoir.
- Slide the fuel level sensor up, in order to remove the sensor from the module slot.
Installation Procedure
- Position the fuel level sensor over the slot in the reservoir and slide the sensor down into the slot.
- Ensure that the fuel level sensor retainers (1) engage the module reservoir.
- Install the fuel level sensor wiring pigtail under the module clip (2).
- Connect the fuel level sensor wiring pigtail electrical connector (1) to the module cover.
- Install the fuel tank module. Refer to
Fuel Sender Assembly Replacement.
Fuel Level Sensor Replacement Regular Cab w/34 Gal Tank
Removal Procedure
- Remove the fuel tank module. Refer to
Fuel Sender Assembly Replacement.
- Disconnect the fuel level sensor wiring pigtail electrical connector (1) from the module cover.
- Remove the fuel level sensor wiring pigtail from under the module clip (2).
- Gently push in the fuel level sensor retainers (1), disengaging them from the module reservoir.
- Slide the fuel level sensor up, in order to remove the sensor from the module slot.
Installation Procedure
- Position the fuel level sensor over the slot in the reservoir and slide the sensor down into the slot.
- Ensure that the fuel level sensor retainers (1) engage the module reservoir.
- Install the fuel level sensor wiring pigtail under the module clip (2).
- Connect the fuel level sensor wiring pigtail electrical connector (1) to the module cover.
- Install the fuel tank module. Refer to
Fuel Sender Assembly Replacement.