Preliminary Procedure

Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .

1

Shock Absorber Retaining Nut

Notice: Refer to Fastener Notice in the Preface section.

Tip
Support the lower control arm with a safety stand.

Tighten
24 N·m (17 lb ft)

2

Insulator (Qty: 2)

Tip

1. Install the lower insulator, which is smaller than the upper insulator and plastic pilot ring.
2. Install the upper insulator, which is the larger of the 2 insulators.

3

Retaining Nut

Tighten
80 N·m (59 lb ft)

4

Mounting Bolt

5

Shock Absorber

Tip
If replacing the shock absorber, refer Shock Absorber Disposal for the proper disposal procedure.