• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach |
• | Diagnostic Procedure Instructions provides an overview of each diagnostic category |
The driver and passenger door lock and side window switches are integrated control module switch assemblies.
Battery voltage must be between 9-16 volts.
The driver or passenger door module receives simultaneous active signals from both sides of an integrated switch.
The driver or passenger door module ignores inputs from the malfunctioning switch.
• | The DTC will be current for as long as the fault is present. |
• | When the fault is no longer present, the DTC will be a history status code. |
• | A history DTC will clear after 50 ignition cycles or with a scan tool using the clear DTCs function. |
Door Control Module Schematics
Vehicle Access Connector End Views
⇒ | If any of the integrated switch inputs are displayed as Active while in an inactive state, replace the door module. |
⇒ | If the DTC resets, replace the affected door module. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for driver or passenger door switch replacement, programming, and setup.