GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Sierra Denali 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Intermediate Cable Replacement

Parking Brake Intermediate Cable Replacement JD9, JF3, JF7

Removal Procedure

    Object Number: 1850950 Size: SH
  1. Release the park brake.
  2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Disconnect the front park brake cable (2) from the intermediate cable connector by drilling a 3 mm (1/8 in) hole through the dimple in the front to intermediate park brake cable connector (1).

    5. Object Number: 1850952 Size: SH
  5. Disconnect the left park brake cable (1) and the right park brake cable (2) from the equalizer bar (3) on the intermediate park brake cable.
  6. Remove the intermediate park brake cable.

Installation Procedure

    Object Number: 1850952 Size: SH
  1. Connect the left park brake cable (1) and the right park brake cable (2) to the equalizer bar (3) on the intermediate park brake cable.

    2. Object Number: 1850950 Size: SH
  2. Connect the front park brake cable (2) to the intermediate cable connector.
  3. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .
  4. Adjust the park brake. Refer to Park Brake Adjustment .

Parking Brake Intermediate Cable Replacement JH6, JH7

Removal Procedure

    Object Number: 1862950 Size: SH
  1. Release the park brake.
  2. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  4. Disconnect the front park brake cable (2) from the intermediate cable connector (1) by drilling a 3 mm (1/8 in) hole through the dimple in the front to intermediate park brake cable connector.

    5. Object Number: 1862951 Size: SH
  5. Disconnect the left park brake cable (2) from the intermediate cable connector (1) by drilling a 3 mm (1/8 in) hole through the dimple in the front to intermediate park brake cable connector.
  6. Remove the intermediate park brake cable.

Installation Procedure

    Object Number: 1862951 Size: SH
  1. Connect the left park brake cable (2) to the intermediate park brake cable connector (1).

    2. Object Number: 1862950 Size: SH
  2. Connect the front park brake cable (2) to the intermediate park brake cable connector (1).
  3. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .
  4. Adjust the park brake. Refer to Park Brake Adjustment.