Removal Procedure
- Remove the steering column shroud. Refer to
Steering Column Shroud Replacement.
- Roll back the shift lever seal on the shift lever until the shift lever bolt is exposed.
- Disconnect any electrical connectors as needed.
- Remove the shift lever bolt (2).
- Remove the shift lever (1).
Installation Procedure
- Install the shift lever (1).
Notice: Refer to Fastener Notice in the Preface section.
- Install the shift lever bolt (2).
Tighten
Tighten the bolt to 20 N·m (15 lb ft).
- Connect all electrical connectors.
- Position the shift lever seal.
- Install the steering column shroud. Refer to
Steering Column Shroud Replacement.