Tools Required
J 43769
Spanner Nut Wrench - 4WD
- The fullest clockwise position of the manual shift shaft is Park (P), which engages the park pawl.
- Using a wrench on the manual shift shaft flats (1), rotate the shaft to the fullest clockwise position.
- Ensure the park pawl is engaged.
- Install the
J 43769
(1) onto the output shaft retaining nut, 4WD (2).
Notice: Refer to Component Fastener Tightening Notice in the Preface section.
- Using the
J 43769
(1), install a new output shaft retaining nut, 4WD (2) onto the output shaft (3).
Tighten
Tighten the nut to 61 N·m (45 lb ft).
Important: The Neutral (N) position of the manual shift shaft is 2 detent positions counterclockwise from the fullest clockwise position.
- Using a wrench on the manual shift shaft flats (1), rotate the shaft to the fullest clockwise position.
- Rotate the manual shift shaft counterclockwise 2 detent positions.
- Make sure the park pawl is disengaged.