Output Speed Sensor Installation 2WD
Tools Required
J 36850
Transjel® Lubricant
- Install the vehicle speed sensor O-ring (3) onto the output speed sensor (OSS) (2).
- Apply
J 36850
to the O-ring (3).
- Install the OSS (2) into the low and reverse clutch housing, 2WD.
Notice: Refer to Fastener Notice in the Preface section.
- Install the vehicle speed sensor bolt (1) into the low and reverse clutch housing, 2WD.
Tighten
Tighten the bolt to 12 N·m (108 lb in).