GM Service Manual Online
For 1990-2009 cars only

Rear Spoiler Replacement 901/902


Object Number: 1684064  Size: SF

Callout

Component Name

1

Endgate Spoiler Assembly Screws (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

2

Endgate Spoiler Assembly Locator Pin

3

Endgate Spoiler Assembly Adhesive Tape Liner

Tip

    • The part and surface should be ambient temperature prior to installation. The vehicle should remain ambient temperature for one hour after assembly to allow adhesive to develop sufficient bond strength.
    • Release the liner and wet out once the endgate spoiler is in position and the screws have been installed.

4

Endgate Spoiler Assembly

5

Endgate Spoiler Assembly Riv-nuts (Qty: 4)