GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 2008728  Size: SH
  1. Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
  2. If equipped remove the heat stakes (1) from the HVAC module (2) with a screwdriver and a hammer.

  3. Object Number: 962571  Size: SH
  4. If equipped remove the HVAC module assembly screws.
  5. Separate the HVAC module assembly.
  6. Remove the air temperature separator plate (5) from the HVAC module assembly (10).
  7. Remove the lower mode door (9) from the HVAC module assembly (10).

Installation Procedure


    Object Number: 962571  Size: SH
  1. Install the lower mode door (9) to the HVAC module assembly (10).
  2. Install the air temperature separator plate (5) to the HVAC module assembly (10).
  3. Install the HVAC module assembly halves.
  4. Notice: Refer to Fastener Notice in the Preface section.

    Important: For every heat stake removed ensure that you install a screw.

  5. Install the screws to the HVAC module assembly.
  6. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  7. Install the HVAC module. Refer to HVAC Module Assembly Replacement .