GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Sierra Denali 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Clutch Pedal Engine Start Switch Replacement

Removal Procedure

    Object Number: 776950 Size: SH
  1. Disconnect the clutch pedal position switch electrical connector (1).

    2. Object Number: 1958454 Size: SH
  2. Remove the plastic retainer (1) tabs from the clutch pedal position switch (2).
  3. Remove the clutch pedal position switch (2) from the pushrod.

Installation Procedure

    Object Number: 1958454 Size: SH
  1. Install the clutch pedal position switch (2) to the pushrod.
  2. Install the plastic retainer (1) tabs to the clutch pedal position switch (2).

    3. Object Number: 776950 Size: SH
  3. Connect the clutch pedal position switch electrical connector (1).

    4. Warning: Replacement or reprogramming of the ECM, or replacement of the clutch pedal position sensor (CPPS) or clutch pedal requires that a CPPS learn procedure be performed. Failure to perform the CPPS learn procedure may result in personal injury or damage to the vehicle or its components if the vehicle is in gear and the starter motor is accidentally engaged.

  4. Perform the clutch pedal position sensor learn procedure. Refer to DTC P080A or Clutch Pedal Position Sensor Learn .