Special Tools

J 36850 Transjel® Lubricant

For equivalent regional tools, refer to Special Tools.

1. Install the vehicle speed sensor O-ring (3) onto the output speed sensor (OSS) (2).
2. Apply J 36850 lubricant to the O-ring (3).
3. Install the OSS (2) into the low and reverse clutch housing, 2WD.

Caution: Refer to Fastener Caution in the Preface section.

4. Install the vehicle speed sensor bolt (1) into the low and reverse clutch housing, 2WD. Tighten the bolt to 12 N·m (108 lb in).