Removal Procedure
- Remove 6 bolts (3).
- Remove the power take-off (PTO) cover (2) and gasket (1). Discard the used gasket.
- Ensure the PTO gasket face on the transmission case is free of all foreign material, nicks, and scratches.
Installation Procedure
- Install the new PTO cover gasket (1) and cover (2).
Caution: Refer to Fastener Caution in the Preface section.
- Start the top-center bolt (3) first. Install the other 5 bolts.
Tighten
Tighten all bolts to 43 N·m (32 lb ft).